DD
我終於知道點解上次係sasa買既袋裝香水樽仔咁貴啦, (我用黎裝花水隨時都可以噴噴噴)原來除左玻璃外, 膠既地方係pet, 跟手搵埋pet既膠樽仔裝有關精油既產品啦, 原來真係唔多架, 淨得sasa有得賣, 6蚊雞, 貴過其他既少少, body shop既產品樽大部份都係用pet 膠樽架, 我好似傻婆咁每隻樽返轉個底睇下......haha 同佢佢地既蓋係我最心愛的啪蓋, 唔會用到最後10分一倒轉放時, 開轉蓋咁巴巴聲倒哂出黎, 但我對佢既產品一d興趣都無, 淨係對佢既樽同蓋有興趣, 幾傻呀
返到屋企再睇下, 發現以前買落既香薰產品又係用pet
其實 pet , pvc, pp 有乜分別呢? thx

之前_id=933477
有無人用天然香薰油做護膚品架？

jandt818,
你做板主呀? 開張大吉!
開新版都好o既....之前實在拖得太長了~
有你呢個班長整理file,大家真係有福喇,thanks~

jandt818,
我俾你隻膠樽係PETE添呀~仲靚呀....
膠樽廠老闆娘話最靚係PETG,兩種都符合外國歐盟標準,無毒安全~
要另賣一種機先做到,所以會貴d嫁~

報個靚到先~~~~~

MaN mAn ,
Welcome~ 呢度暫時好空礦,唔似嗰邊我成日都要追住D page, ha.))) ha))))

Hello! 新屋入伙....恭喜恭喜

dd,

無呀!最近都係溝左patchouli做洗面奶...遲d會試下用oil, 睇下係唔係會好d...因為好多人話用油洗面好d.....無咁乾,同埋清潔能力高d...我額頭成日都有暗粒....都唔知點解.

jandt818,

麻煩你可不可以send 個part 1 o個thread的file給我,
謝謝你......

zzz@she.com

oh.... 我剛才才看到你說she.com的email 不夠大的文章......麻煩你send 去....

howai@brucelee-jun-fan.com


THANKS!
THANKS!
THANKS!

另外......
dd, 你.....真的很棒 !!!

snoopy,
係呀~我都覺得晚上用完卸妝油按摩沖洗,先再清潔品再次清潔,係會好徹底咁潔淨到~
我住nt,平日都ok....有時去全日去kln d人多車多的地方,攞張紙巾抹吓面,就見到灰灰黑黑....而家d空氣質素好得人驚~~
我平日無咩護膚,不過好注重清潔程序~
以前唔識,咩牌子都試勻,始終治標唔治本,d黑頭點清都好,幾日就走番出來......依家就係靠加左eo的卸妝油按摩,用油溶化污漬,再洗面gel/mousse洗; 唔知係咪eo+油,日日咁按吓....(雖然都係唔靚>_<)毛孔再無咁易積聚黑頭粉剌了~ 雖然舊時攪落d毛孔粗左,不過無黑頭,睇落就面色都均勻d;
不過diy的卸妝油無咩話清潔力高唔高,就係使用油可沾附油污的原理而已,反而對唔同膚質,添加不同量的乳化劑就有不同乳化力,一般乾性皮膚用得較少,免至過度去脂.
你可以試吓整d卸妝油,加d 天竺葵,杜松類eo排吓毒,睇吓對d暗粒好唔好d~
你枝洗面奶係買base?我都好鐘意patchouli嗰種清香味~

zzz,
吓....@__@" 你咪咁啦....大家交流吓啫,唔好介意邊個講多講少; 各人有咩經驗,好的壞的都講吓,互相交流經驗,大家咪會多d參考資料咯~~
呢度都好多叻人,有d潛水睇唔出聲,有d就偶然先亮吓相....我不過係較閒,多d空餘時間,所以你會發覺我好多口水吓~

dd ~~ 係呀, 呢度好空曠, 空氣都好d, 我會多d走入黎.

係呀, 有問題想問, 我要溝支油減小腿呀, 因為想著boots靚d, 可以用咩eo?? (係咪杜松, 西柚.....etc??) 我d肉係好實果種.........好難搞.

Jandt818,
以下由我個潛水朋友提供~

1)
Polyethylene terephthalate (PET)
A resin with outstanding clarity and good resistance to impact, along with good barrier properties to resist grease and oil, cold and sunlight.

Polyethylene Terephthalate is an excellent material for use in orientation blow molding (stretch blow molding). It is commonly used for carbonated beverage bottles. Oriented PET provides very good alcohol and essential oil barrier properties, generally good chemical resistance (although acetones and ketones will attack PET) and a high degree of impact resistance and tensile strength. The orienting process also serves to improve gas and moisture barrier properties.

This material does not provide resistance to high temperature application (max. temp. 160° F). However, heat-set PET creates a container which will accept a 195° F hot fill and exhibit the clarity of other PET containers. This process provides an alternative to glass for products such as juice.

2)
Polyethylene terephthalate glycol (PETG)
A resin with good barrier properties and outstanding clarity, with a slightly higher tolerance to distortion temperatures, as compared to PET.

PETG: Glycol modified Polyethylene Terephthalate is a durable material with excellent gloss, clarity and sparkle desired for clear bottles. PETG can be processed via conventional extrusion blow molding methods, generally on machines designed to process PVC.

Applications include shampoos, soaps, and detergents. PETG exhibits a good impact strength and gas barrier. The chemical resistance of PETG is fair and compatibility testing is recommended, especially with products that contain alcohol.

接上:

Polypropylene (PP)
A tough, lightweight, rigid plastic made by the polymerization of high-purity propylene gas in the presence of an organometallic catalyst at relatively low pressures and temperatures.

Polypropylene is a naturally translucent material which provides contact clarity and an excellent moisture barrier.

PP is easily processed via injection molding (jars and closures), and injection, extrusion, or stretch blow-molding (bottles). One major advantage of polypropylene is its stability at hight temperatures, up to 200° F. Polypropylene is autoclavable and offers the potential for steam sterilization. The compatibility of PP with high filling temperatures is responsible for its use with hot fill products such as pancake syrup.

PP has excellent chemical resistance, but provides poor impact resistance in cold temperatures. Oriented PP offeres improved impact resistance and clarity at low temperatures.

Produced in color, PP exhibits a glossy finish.

Polystyrene (PS)
Thermoplastic compound used to make plastic containers, closures and more.

Polyvinyl chloride (PVC)
A thermoplastic material composed of polymers of vinyl chloride; a colorless solid with outstanding resistance to water, alcohols, concentrated acids and alkalis.

PVC is naturally clear, has extremely good resistance to oils, and has very low oxygen transmission. It provides an excellent barrier to most gasses and its drop impact resistance is also very good. This material is also very chemically resistant, but it is vulnerable to solvents. PVC is a semi-rigid material which, when produced on extrusion blow-molding equipment, can accommodate handled designs.

PVC is available in different grades depending on its application. These grades include general purpose grade, food grade, and fragrance-guard perume grade. The occurrence of the blue tint in clear PVC can be modified by controlling the toner levels in each of these grades. PVC is also available in a rigid injection blow molding grade.

General Purpose PVC exhibits poor resistance to high temperatures and will distort at 160° F, making it incompatible with hot filled products. New PVC grades are able to withstand temperatures up to 190° F and can be hot filled. Since it provides a good oxygen barrier, PVC is an excellent choice for salad oil, mineral oil, and vinegar. It is also commonly used for shampoos and cosmetic products.

Polyvinylidene chloride (PVDC)
Improves barrier properties to increase shelf life or to protect product. Used as a barrier material in a coating form, a layer in lamination or as part of a coextruded structure for a rigid container.

接上,

Polyethylene, high-density (HDPE)
In the high-density grade, this thermoplastic material is more rigid and less permeable than the low-density grade. It also displays a higher tolerance to distortion temperatures.

HDPE is the most widely used resin for extrusion blown plastic bottles. This material is economical, impact resistant, and provides a good moisture barrier. HDPE is compatible with a wide range of products including acids and caustics but is not compatible with solvents. It is usually supplied in FDA approved food grade.

HDPE is naturally translucent and flexible. The addition of color will make HDPE opaque although not glossy. Adding extra weight to the bottle will yield a rigid container.

HDPE is supplied flame-treated on a stock basis and lends itself readily to silk screen decoration. While HDPE provides good protection at below freezing temperatures, it cannot be used with products filled at over 160° F or products requiring a hermatic seal.

Polyethylene, low-density (LDPE)
Squeezability is good, especailly in the low-density grade of this thermoplastic material. It also displays better resistance to impact than the high-density grade.

LDPE is similar to HDPE in composition. It is less rigid and generally less chemically resistant than HDPE, but is more translucent. LDPE is used primarily for squeeze applications. LDPE is significantly more expensive than HDPE, but will yield a glossy bottle when produced in colors.

Polyethylene, medium-density (MDPE)
MDPE combines the characteristics of low and high density polyethylene. Bottles are less translucent than LDPE but more flexible than HDPE. Like LDPE, MDPE is glossy when produced in colors.

jandt,
係咪睇到眼花呢?不過係好有用的資料,以後知咩嘢載响邊個膠容器了....我會幫你多謝阿姐喇....hahaha

MaN mAn ,
睇吓以上有無用,試小小用吓咯~
局部減肥按摩, 絲柏 4d +天竺葵 5d +葡萄柚6d + 20ml co
我知可能有人話eo太多,不過我依書直抄咋,話係減肥,唔係去水嗰隻...好似啱你d~

cute tiger
could u send me the infromation about the drinkable hydrosol?

I am interesting in it......

howai@brucelee-jun-fan.com

Thanks!

其實我都有一個小小心得,不過你要有浴缸,開缸熱水(你能忍受的熱度,)加cypress 4d,fennel 4d,juniper 3d, .........會有點拮肉,是fennel的原因,

嘩.......第2日起床的第一篤尿尿......勁重fennel味

and
如果你不怕冷的話,用peppermint來massage,(3% of 10ml)
不過怕冷的就不suggest了

唔好意思剩上來攞料.....所以說了此些皮毛....

獻醜獻醜......

zzz
明天會給你。

很多人都有鼻的問題，鼻敏感或各類症狀，phytosun 的 esculape 驅風寶對長期鼻敏感是很好的，有個小孩嚴重到時時要入院，用了一段時間，就起碼不用再入院了。 而且，對頭風好好的，朋友教我用來捽頭頂。 但是，有些人接受不了那味道，今晚，與朋友傾開，原來，我只把乳香集中在護膚，忽略了它其他功用如對鼻問題的效用，真是浪費了這隻精油。 我朋友的下屬，長期鼻有問題，又敏感，又易生瘡，後來，她們薰了乳香，就幫助解決了鼻的問題不少，呼吸也舒服了很多。
jandt818 你跟我說過你的鼻問題，我不肯定有沒有功效，但我覺得值得一試。 因為要長期薰，覺得精油太貴的話，可以燒 resin，kobashi 那隻 frankincense tears 就唔錯，幾香 (想不到，他的 frankincense EO 氣味使我有點失望，resin 卻幾好)，不過，燒 resin 都幾大煙，你考慮o下，希望幫到你。

zzz
咦，你係 bruce lee fans？ 我都係呀!!!!!!
咁你識唔識功夫架？

jandt818
仲有呀，frankincense 對尿道炎和膀胱炎都有功效架。

zzz
多 d 係到 share 啦，實際經驗係好寶貴架。
咁多 formula，各學說教派的 blending 都唔同，有時真係花多眼亂，所以，有人有實際經驗真係好好多。
其實這裡好多叻人，但又唔係時時會得閒講，好似 mickey 咁，她見我咳到死，比左條 formula，真係好正，醫得好快。 所以，請多 d share，多 d 人就得益。